Post Image

NL100

The NL100 Network Link Interface is a 10baseT ethernet communication peripheral. The device allows any Campbell datalogger with an RS-232 or CS I/O port to communicate with a computer using TCP/IP, making it possible to ...

Show More
Post Image

NL120

The NL120 allows the datalogger to communicate over a local network or a dedicated Internet connection via TCP/IP. This small, rugged communication device connects directly to the 40-pin peripheral port on a CR1000 or CR...

Show More
Post Image

CF1

The CF1 adapter allows PCMCIA slots to store data on a CompactFlash card. Devices with a PCMCIA slot include PCs, CR5000 dataloggers, CR9000X-series dataloggers, and the CR9080 PAM Module for our CR9000 dataloggers. Card...

Show More
Post Image

17752

This single slot, high-speed reader/writer allows a computer to read a memory card. When used with Campbell Scientific equipment, the 17752 typically reads data stored on CompactFlash cards, but it can read many differen...

Show More
Post Image

CompactFlash Memory Cards

CFMC64M 64 MB CompactFlash Memory Card The CFMC64M, manufactured by Silicon Systems, stores 64 Mbytes of data. This industrial-grade CompactFlash card has passed Campbell Scientific's ESD testing. One CFMC64M card is...

Show More
Post Image

NL115

The NL115 is a 10baseT ethernet interface device and a CompactFlash module. The device allows a Campbell CR1000 or CR3000 datalogger to communicate with a computer using TCP/IP, making it possible to communicate over a l...

Show More
Post Image

CFM100

The CFM100 is an external CompactFlash® module used to extend the memory of the CR1000 or CR3000. CompactFlash memory cards (purchased separately) are required. The CFM100 connects to the datalogger's peripheral port...

Show More
Post Image

SC115

The SC115 CS I/O-to-USB Flash Memory Drive is an innovative 2-GB device that allows you to augment your onsite data storage or to transport data between the datalogger and PC. It has both a CS I/O port and a USB port, fo...

Show More
Post Image

CSAT3

The CSAT3 is a three-dimensional sonic anemometer. It measures wind speed and the speed of sound on three nonorthogonal axes. From these measurements, orthogonal wind speed and sonic temperature can be computed. The CSAT...

Show More
Post Image

Sonic Wind Sensors

WINDSONIC1-L Sonic Wind Sensor, RS-232 The WindSonic1, manufactured by Gill Instruments Ltd., is a two-dimensional ultrasonic anemometer for measuring wind direction and speed. The WindSonic is an alternative to traditio...

Show More