The NL115 is a 10baseT ethernet interface device and a CompactFlash module. The device allows a Campbell CR1000 or CR3000 datalogger to communicate with a computer using TCP/IP, making it possible to communicate over a local area network or a dedicated Internet connection.
The NL115/CF card combination can be used to expand the datalogger’s memory, transport data/programs from field site to the office, and store JPEG images when the CC640 digital camera is connected to the datalogger. You can retrieve data stored on the CompactFlash card through a communications link with the datalogger or by removing the card and carrying it to a computer. The computer can read the CompactFlash card either with the computer’s PCMCIA slot and the CF1 adapter or the computer’s USB port and the ImageMate® Reader/Writer.

Features

Combines the functionality of our NL100 Network Link Interface and CFM100 CompactFlash Module
Connects to the 40-pin peripheral port on a CR1000 or CR3000 datalogger
Communicates over a local area network or dedicated Internet via TCP/IP
Stores data on a removable CompactFlash card (industrial-grade cards required, purchased separately)
Can handle card capacity up to 2 GB
Uses DevConfig to setup

Specifications

Power Requirements: 12 V supplied through the datalogger's peripheral port
Typical Current Drain: 20 mA (CR1000 w/NL115 communicating over Ethernet); 43 mA (CR1000 w/NL115 communicating over Ethernet and accessing CF-card)
EMI and ESD Protection: Meets requirements for a class A device under European Standards
Application of Council Directive(s): 89/336/EEC as amended by 89/336/EEC and 93/68/EEC
Standards to which Conformity is Declared: EN55022-1; 1995 and EN50082-1: 1992
Typical Access Speed: 200 to 400 kbytes s-1
Memory Configuration: User selectable; ring (default) or fill-and-stop
CF Card Requirements: Industrial-grade; storage capacity of 2 Gbytes or less
Cable Requirements: Ethernet cable must be shielded if the length is greater than 9 ft
Datalogger Operating System (OS)
Version OS9 or later
CR3000: All CR3000 OSs
Software Requirements
LoggerNet: Version 3.2 or later
PC400: Version 1.3 or later
DevConfig: Version 1.5 or later

Producing Area:USA