The CFM100 is an external CompactFlash® module used to extend the memory of the CR1000 or CR3000. CompactFlash memory cards (purchased separately) are required. The CFM100 connects to the datalogger's peripheral port.

Features

External CompactFlash module
Compatible with CR1000 and CR3000
Connects to the datalogger's peripheral port
Industrial-grade CompactFlash cards required
Can handle card capacity up to 2 GB

Specifications

Typical Access Speed: 200 to 400 kbytes s-1
Memory Configuration: User selectable; ring (default) or fill-and-stop
Power Requirements: 12 V supplied through the datalogger’s peripheral port
Typical Current Drain
RS-232 Port Active: 30 mA (writing to card); 20 mA (reading card)
RS-232 Port Not Active: 20 mA (writing to card); 15 mA (reading card)
Low Power Standby: 700 to 800 μA
CF Card Requirements: Industrial-grade; storage capacity of 2 Gbytes or less
Datalogger Operating System (OS)
CR1000: Version OS4 or later
CR3000: All CR3000 OSs
Software Requirements
LoggerNet: Version 3.1.3 or later
PC400: Version 1.2.1 or later

Producing Area:USA