The NL100 Network Link Interface is a 10baseT ethernet communication peripheral. The device allows any Campbell datalogger with an RS-232 or CS I/O port to communicate with a computer using TCP/IP, making it possible to communicate over a local area network or a dedicated Internet connection.

Features

Communicates over a local area network or dedicated Internet via TCP/IP
Supported by PC400 and LoggerNet
Connects to datalogger's RS-232 or CS I/O port
Compatible with all of our contemporary dataloggers as well as most retired dataloggers (e.g., 21X, CR23X, CR500)
Uses a 10baseT ethernet straight-through or crossover cable

Specifications

Communication Rate
RS-232 DTE Port: up to 115.2 kbps
RS-485 & CS I/O Ports: up to 38.4 kbps
Power Requirements: 12 Vdc supplied via 13947 wall charger or datalogger‘s 12 Vdc power supply
Typical Current Drain: ~140 mA continuous
EMI & ESD Protection: Meets requirements for a class A device under European Standards
Application of Council Directive(s): 89/336/EEC as amended by 89/336/EEC and 93/68/EEC
Standards to which Conformity is Declared: EN55022-1; 1995 and EN50082-1: 1992

Producing Area:USA