The Archer-PCON is a version of Juniper Systems' Archer Field PC with specialized software. The Archer-PCON is designed for general Campbell Scientific data-acquisition systems. The Archer Field PC is ultrarugged, me...

The MD9 Multidrop Interface links a computer to as many as 200 dataloggers over a single coaxial cable. Each datalogger in the network is connected to an MD9 that has a unique, user-assigned address. Communication betwee...

The MD485 is an intelligent RS-485 interface that permits a PC to address and communicate with one or more dataloggers over a distance of up to 4000 ft. This interface also supports datalogger-to-datalogger communication...

The CD620 is the display used in the Hydrosense System. The CD620 HydroSense Display is a splash-proof unit that includes two integral membrane buttons used to operate the system and a 16-character, two-line LCD display....

The CD294 DataView Display is a two-line, 32-character LCD for use with mixed-array dataloggers. It displays one real-time value, a description, and units. The CD294 is mounted in an enclosure lid allowing you to view da...

The CD295 DataView II Display is a two-line, 32-character LCD for use with PakBus dataloggers. It displays one real-time value, a description, and units. The CD295 is mounted in an enclosure lid allowing you to view data...

The SC-IRDA is an infrared device that allows a PDA handheld to communicate with a datalogger without opening the enclosure door. Typically this interface is placed in a compression fitting that has been added to the sid...

The 17394 is a six-foot interface cable fitted with a USB connector on one end and a 9-pin male RS-232 connector on the other end. The USB connector attaches to the USB port of a PC. The RS-232 connector attaches to the ...

The SC929 converts the CMOS logic levels of our dataloggers to the RS-232 logic levels of a battery-operated laptop. The SC929 is a simple 9-pin to 9-pin interface designed for "walk up" connection to a datalog...

The SC32B Optically Isolated Interface is used to connect a datalogger’s CS I/O port with a PC’s RS-232 port. This interface converts the computer’s RS-232 voltage levels to the CMOS levels of the datalogger. It also iso...