Post Image

SR50A-L

The SR50A measures the distance from the sensor to a target. The most common applications are measuring snow depths and water levels. The sensor is based on an electronic transducer that determines the distance to a targ...

Show More
Post Image

CS431-L

The CS431, manufactured by Instrumentation Northwest for use with Campbell Scientific dataloggers, measures both water level and water temperature. It uses piezoresistive strain gage technology to measure water level and...

Show More
Post Image

CS477-L

The CS475, CS476, and CS477 series of radar-based water-level sensors brings a highly accurate innovation to Campbell Scientific's array of sensors. The CS477 is built with enhanced electronics, giving it a much long...

Show More
Post Image

CS460-L

This submersible pressure transducer is manufactured by Keller America. The CS460 measures water level with an accuracy of 0.1% FSR by using a strain gage bonded to a pressure-sensitive diaphragm. Electrical resistance c...

Show More
Post Image

CS476-L

The CS475, CS476, and CS477 series of radar-based water-level sensors brings a highly accurate innovation to Campbell Scientific's array of sensors. The CS476 is built for higher accuracy and a longer range. Mounted ...

Show More
Post Image

CS475-L

The CS475, CS476, and CS477 series of radar-based water-level sensors brings a highly accurate innovation to Campbell Scientific's array of sensors. Mounted above the water surface to be measured, the sensors use rad...

Show More
Post Image

CS410-L

The CS410 is a shaft encoder designed for water level measurements. A pulley attached to a a float and counter-weight rotates as water level rises or falls, and the shaft encoder sends two pulse strings to the datalogger...

Show More
Post Image

CS410-L

The CS410 is a shaft encoder designed for water level measurements. A pulley attached to a a float and counter-weight rotates as water level rises or falls, and the shaft encoder sends two pulse strings to the datalogger...

Show More
Post Image

Bubble Water Level Sensors

CS470 Bubble Water Level Sensor The CS470 uses bubble-sensor technology to measure water level. It has two standard interfaces: SDI-12 and 4-20 mA. It has onboard intelligence that allows it to optimize the pumping of ai...

Show More
Post Image

CS455-L

Over the years, we’ve offered submersible pressure transducers from various manufacturers for measuring pressure, depth, or level in hydrological applications. We are pleased to announce that we have designed and are now...

Show More