Post Image

PRT Bridge Modules

4WPB100 PRT Bridge Module The 4WPB100 provides completion resistors for measurement of a 100 Ohm Platinum Resistive Thermometer (PRT). Features Connects directly into datalogger input terminals; "prongs" on low...

Show More
Post Image

Terminal Input Modules

4WFBS120 Terminal Input Module (TIM) Terminal input modules (TIMs) are small peripherals that provide completion resistors for resistive bridge measurements, or act as voltage dividers or precision current shunts. The mo...

Show More
Post Image

Voltage Dividers

VDIV10:1 Voltage Divider The VDIV10:1 divides the sensor's signal voltage by a factor of 10. Increased input settling time may be necessary to accommodate the relatively high resistance of the voltage divider. The re...

Show More
Post Image

CURS100

The CURS100 converts a current signal output by a sensor or output device (e.g., 4 to 20 mA) to a voltage that can be measured by a datalogger. The 100 ohm resistor used for the current shunt allows currents up to 25 mA ...

Show More
Post Image

A6REL-12

The A6REL-12 contains six dual single-pole double-throw internal relays that control up to twelve external ac or dc devices. Each of the six relay sets can be controlled manually or by a datalogger control port. A6REL-12...

Show More
Post Image

A21REL-12

The A21REL-12 contains four single-pole double-throw internal relays that control up to four external ac or dc devices. Features Contains four single-pole double-throw (SPDT) internal relays Controls up to four external ...

Show More
Post Image

AVW1

The AVW1 is available as a replacement part or as needed for continuity or compatibility, but we recommend the AVW200-series interfaces for all new applications. The AVW200 interfaces are much more accurate and feature a...

Show More
Post Image

AVW4

The AVW4 is available as a replacement part or as needed for continuity or compatibility, but we recommend the AVW200-series interfaces for all new applications. The AVW200 interfaces are much more accurate and feature a...

Show More
Post Image

AVW100

The AVW100 is available as a replacement part or as needed for continuity or compatibility, but we recommend the AVW200-series interfaces for all new applications. The AVW200 interfaces are much more accurate and feature...

Show More
Post Image

AVW216

The AVW216 has the same features and capabilities as the AVW200, with the addition of an internal spread-spectrum radio for wireless communication. The radio operates at the 2.4GHz frequency, for use world wide. The new ...

Show More