VDIV10:1 Voltage Divider

The VDIV10:1 divides the sensor's signal voltage by a factor of 10. Increased input settling time may be necessary to accommodate the relatively high resistance of the voltage divider. The resistors are ±0.02% 10 and 90 kohm.

Features

Connects directly into datalogger input terminals; "prongs" on lower surface are secured into datalogger screw terminals
Makes accurate measurement of sensors with larger voltage outputs simple; sensors are measured with a voltage measurement instruction

Specifications

Division Ratio: 10:1
Resistors: 10 kohm and 90 kohm
Ratio Tolerance (@ 25°C): ±0.02%
Power Rating per Element: 0.1 W @ 70°C
Maximum Ratio Temperature Coefficient (0° to 70°C): 2 ppm/°C

VDIV2:1 Voltage Divider

The VDIV2:1 divides the sensor's signal voltage by a factor of 2. Increased input settling time may be necessary to accommodate the relatively high resistance of the voltage divider. Both resistors are ±0.02% 10 kOhms.

Features

Connects directly into datalogger input terminals; "prongs" on lower surface are secured into datalogger screw terminals
Makes accurate measurement of sensors with larger voltage outputs simple; sensors are measured with a voltage measurement instruction

Specifications

Division ratio: 2:1
Resistors: 10 kOhm and 10 kOhm
Ratio Tolerance (@ 25°C): ±0.02%
Power Rating per Element: 0.1 W @ 70°C
Maximum Ratio Temperature Coefficient (0° to 70°C): 2 ppm/°C

Producing Area:USA