Post Image

AVW211

The AVW211 has the same features and capabilities as the AVW200, with the addition of an internal spread-spectrum radio for wireless communication. The radio operates in the 920- to 928-MHz frequency range, for use in Au...

Show More
Post Image

AVW206

The AVW206 has the same features and capabilities as the AVW200, with the addition of an internal spread-spectrum radio for wireless communication. The radio operates in the 910- to 918-MHz frequency range, for use in Am...

Show More
Post Image

AVW200

The AVW200 interface module applies a new method for measuring a sensor's frequency. The AVW200 eliminates the problem of incorrect readings due to noise sources. The noise problems are overcome by an advancement in ...

Show More
Post Image

HUB-SDM8

The HUB-SDM8 is intended for customers who want to connect multiple SDMs to the same datalogger, as well as run multiple power connections using a 16 AWG wire. The HUB-SDM8 is comprised of an environmental enclosure with...

Show More
Post Image

HUB-SDM5

The HUB-SDM5 can make it more convenient to connect multiple SDMs to a single datalogger. The HUB-SDM5 consists of DIN-rail mounted busbars housed in a small environmental enclosure. Connection terminals for up to five e...

Show More
Post Image

CABLE5CBL-L

The CABLE5CBL-L is a 24-AWG, five-conductor cable with a Santoprene jacket and an aluminum mylar shield. By default, the conductors are stripped and tinned. The cable can also be fitted with a connector for attachment to...

Show More
Post Image

SDM-CAN

The SDM-CAN interface allows a Campbell Scientific datalogger to sample data directly from a CANbus communications network. CANbus data can be stored (and synchronized) with other data values measured directly by the dat...

Show More
Post Image

SDM-INT8

The SDM-INT8 provides eight channels individually programmed to detect voltage transitions, then output any combination of period, pulse width, frequency, counts, and time intervals. Processing by the datalogger yields R...

Show More
Post Image

SDM-SW8A

The SDM-SW8A is an 8-channel pulse count module; each channel can be individually configured for single-pole double throw (SPDT), single-pole single throw (SPST), or voltage pulse measurements. Output options include sta...

Show More
Post Image

SDM-CD16S

The SDM-CD16S is a 16-channel, solid-state relay driver that was originally developed for our trace-gas analysis (TGA) systems. It can control devices that have a relatively high-powered load, such as solenoids, solenoid...

Show More