4WPB100 PRT Bridge Module

The 4WPB100 provides completion resistors for measurement of a 100 Ohm Platinum Resistive Thermometer (PRT).

Features

Connects directly into datalogger input terminals; "prongs" on lower surface are secured into datalogger screw terminals
Makes accurate measurement of 100 Ohm PRTs simple; gauges are measured with a 4-Wire Half-Bridge measurement instruction

Specifications

Current Limiting 10 kΩ Resistor

Tolerance @25°C: ±5%
Power Rating: 0.25 W
 
Completion Resistor (bulk metal foil)

Resistance (Rf): 100 Ω
Tolerance @ 25°C: ±0.01%
Maximum Temperature Coefficient: ±0.8 ppm/°C
Power Rating: 0.25 W @ 70°C

4WPB1K PRT Bridge Module

The 4WPB1K provides completion resistors for measurement of a 1000 Ohm Platinum Resistive Thermometer (PRT).

Features

Connects directly into datalogger input terminals; "prongs" on lower surface are secured into datalogger screw terminals
Makes accurate measurement of 1000 Ohm PRTs simple; gauges are measured with a 4-Wire Half-Bridge measurement instruction

Specifications

Current Limiting 10 kΩ Resistor

Tolerance @25°C: ±5%
Power Rating: 0.25 W
 
Completion Resistor (bulk metal foil)

Resistance (Rf): 1 kΩ
Tolerance @ 25°C: ±0.01%
Maximum Temperature Coefficient: ±0.8 ppm/°C
Power Rating: 0.25 W @ 70°C

Producing Area:USA