The DOT600 Roadbed Water-Content Meter is used in construction applications to measure volumetric and gravimetric water content of samples of earthen material in roadbeds and foundations. Portability, along with quick an...

CM240 Leveling Base and Mount for Rain Gages The CM240 Leveling Base mounts and levels a CS700, TB4, or 385 tipping bucket raingage. The level base ensures more accurate measurements. Features The CM240 attaches to a CM3...

Met One's Model 385 provides year-round measurement of rain or snow. It features a 12-inch diameter orifice that funnels precipitation into the tipping bucket assembly. When the tipping bucket fills, it tips and acti...

The TB4MM tipping bucket rain gage has an 8" orifice and measures rainfall in 0.2 mm increments. It contains an internal siphon mechanism that causes rain to flow at a steady rate to the tipping bucket mechanism (re...

The CS700 rain gage is manufactured by Hydrological Services. Rain funnels into a tipping bucket mechanism that tips when 0.01 inches (0.25 mm) of rain has been collected. Each tip is marked by a dual reed switch closure...

The TB4 rain gage is manufactured by Hydrological Services Pty. Ltd. Rain funnels into a tipping bucket mechanism that tips when 0.01 inches (0.25 mm) of rain has been collected. Each tip is marked by a dual reed switch ...

The TE525-series tipping bucket rain gages are manufactured by Texas Electronics. The TE525MM measures in 0.1 mm increments. The gage funnels precipitation into a bucket mechanism that tips when filled to a calibrated le...

The TE525-series tipping bucket rain gages are manufactured by Texas Electronics. The TE525WS measures in 0.01 inch increments. The gage funnels precipitation into a bucket mechanism that tips when filled to a calibrated...

The TE525 tipping bucket rain gage is manufactured by Texas Electronics. The TE525 measures in 0.01 inch increments. Precipitation is funneled into a bucket mechanism that tips when filled to a calibrated level. A magnet...

The CSIM11 measures pH for the range of 0 to 14 pH with an accuracy of ±0.1 pH unit. The sensor is designed for submersion or insertion into tanks, pipelines, and open channels. The sensor features a plunger-style pH gla...