The CS620 is the sensor used in a HydroSense System. The Hydrosense system combines a compact, handheld display and a sophisticated soil water sensing probe in a portable package to provide quick and reliable soil water ...

The CS625-L measures the volumetric water content of porous media using time-domain measurement methods that are sensitive to dielectric permittivity. The CS625 sensor is similar to our CS616 probe but is for the CR200-s...

The CS616 Water Content Reflectometer measures the volumetric water content from 0% to saturation. It uses time-domain measurement methods, but a reflectometer (cable tester) such as the TDR100 is not required. The probe...

The TCAV-L typically provides the average temperature of the top 6 to 8 centimeters of soil. The probe parallels four type E thermocouples together into one, 24-gauge wire. Each member of a thermocouple pair is buried at...

The 109SS consists of a thermistor encased in a sheath made from grade 316 stainless steel. The rugged stainless-steel sheath protects the thermistor allowing the 109SS to be buried or submerged in harsh, corrosive envir...

The HFP01SC measures heat flux, typically as a component within energy balance or Bowen ratio flux systems. The HFP01SC is manufactured for Campbell Scientific by Hukseflux (Delft, The Netherlands). The sensor outputs a ...

The HFP01 provides soil heat flux measurements—typically for energy balance or Bowen ratio flux systems. It outputs a voltage signal that is proportional to the heat flux of the surrounding medium. At least, two sensors ...

Lufft's IRS21 Intelligent Road Surface Sensor is a passive sensor embedded in the monitored road surface, flush with the surface, to provide measurements of actual road conditions. The IRS21 is a primary component of...

CS215-PWS Temperature and Relative Humidity Sensor For this version of the CS215 Temperature and RH Probe, the cable has, instead of pigtails, a connector for attachment to the PWS100. Cable length is 1 meter. The CS215-...

The PWS100 determines precipitation and visibility parameters for road, marine, and airport automated weather stations. Using a novel optical system and a laser-based light source, a structured detection volume is formed...