Post Image

CR3000

The CR3000 Micrologger® is a self-contained, rugged datalogger that can measure most sensor types directly, communicate via modems, control external devices, and store both data and programs in either non-volatile Flash ...

Show More
Post Image

SC110

The SC110 consists of two cables—each 2-ft (0.6-m) long. One end of each cable provides stripped, tinned leads for attachment to the control ports on a CR800, CR850, CR1000, or CR3000 datalogger. On the other end, one of...

Show More
Post Image

SC-USB

The SC-USB allows Campbell Scientific dataloggers to communicate directly with computers that have a USB interface. The SC-USB is optically isolated, which helps eliminate noise pickup associated with PC power supplies a...

Show More
Post Image

SC32B

The SC32B Optically Isolated Interface is used to connect a datalogger’s CS I/O port with a PC’s RS-232 port. This interface converts the computer’s RS-232 voltage levels to the CMOS levels of the datalogger. It also iso...

Show More
Post Image

CR1000KD

The CR1000KD is used to check datalogger status, display or plot sensor readings and stored values, and to enter numeric data or change port/flag state. One CR1000KD may be carried from station to station in a datalogger...

Show More
Post Image

CR850

The CR850 datalogger is similar to the CR800 datalogger, except it has a keyboard display as part of its integrated package. The CR850 provides a lower-cost datalogger alternative for measurements of a limited number of ...

Show More
Post Image

CR800

The CR800 provides a lower-cost datalogger alternative for measurements of a limited number of sensors, yet can be used with most of our telecommunication devices such as cellular telephones, UHF/VHF RF modems, and satel...

Show More
Post Image

CR1000

The CR1000 datalogger builds on the foundation of our CR10 and CR10X dataloggers, while adding the power and flexibility of our PakBus communications protocol and CRBasic programming. The CR1000 retains the versatility o...

Show More
Post Image

Control Bread Cutter

For the company LEBEMA was developed for you, the control for a newly created series of commercial bread cutting machines. Together with the client has completed the entire development process from definition of the requ...

Show More
Post Image

Trip recorder FLOG

The vehicle specification logging system FLOG makes possible for the user apart from the collection and evaluation of driving data, a software adapted particularly for the employment in small and medium-size enterprises ...

Show More