Post Image

PC200W

PC200W Starter Software is designed for first-time users or users with simple data communication needs; it provides basic tools (clock set, program download, monitor data, retrieve data, etc.). PC200W supports direct con...

Show More
Post Image

Data Cables

SC12 2-Peripheral Connector Cable for Dataloggers The SC12 is our standard cable for connecting the datalogger's 9-pin serial I/O port to most peripherals with a 9-pin port. It is supplied with many of our standard c...

Show More
Post Image

SDS511

The SDS511 dual port adapter allows two communication devices to be connected to one datalogger CS I/O port. This allows you to connect both a modem, such as the COM310, on port 1 and another device, such as a PDA, on po...

Show More
Post Image

SDS122

The SDS122 is a configurable, two-way serial data switch that allows two modem devices to be connected to a datalogger at the same time. The SDS122 connects the datalogger to whichever modem intiates communications allow...

Show More
Post Image

SC932A

The SC932A is used to interface a Campbell Scientific datalogger to a modem that is configured with an RS-232 DCE serial port. The SC932A provides true RS-232 signal levels and two-way communication. Features Used to con...

Show More
Post Image

SC532A

The SC532A is a 9-pin to 9-pin device that interfaces certain Campbell Scientific peripherals to the serial port of a computer. It is typically used with the SM4M, SM16M, CSM1 Card Storage Modules, and MD9 Multidrop Inte...

Show More
Post Image

SC105

The SC105 Interface supports communications between a Campbell Scientific datalogger and an RS-232 DCE device. Common DCE devices used with the SC105 include our Raven100, Redwing100, and Redwing105 cellular transceivers...

Show More
Post Image

SC100

The SC100 can work in a datalogger to sensor mode, or datalogger to computer mode. When used between a datalogger and a computer, the SC100 allows a CR10, CR10X, 21X, or CR23X to send Burst data to a computer. The SC100 ...

Show More
Post Image

Digital Cellular Modem Accessories

18663 Null Modem Cable, 9-pin Male to 9-pin Male This null modem cable connects RS-232 peripherals to the 9-pin RS-232 port on our CR200-series, CR800, CR850, CR1000, CR3000, or CR5000 dataloggers. Common RS-232 peripher...

Show More
Post Image

RAVENXTV

The RavenXTV is a sleek, compact, cellular data modem that allows you to connect wirelessly to the Internet and transmit data from a remote site via the Verizon network. This new modem is 30% smaller than its predecessor...

Show More