CS215-PWS Temperature and Relative Humidity Sensor

For this version of the CS215 Temperature and RH Probe, the cable has, instead of pigtails, a connector for attachment to the PWS100. Cable length is 1 meter. The CS215-PWS makes accurate, stable measurements of both temperature and relative humidity. The Sensirion element can be replaced in the field by the user, eliminating the downtime typically required for a sensor recalibration. The CS215-PWS should be housed in a 41303-5A 6-Plate Naturally-Aspirated Radiation Shield.

Specifications

Sensing Element: Sensirion SHT75
Communication Standard: SDI-12 V1.3 (responds to a subset of commands)
Supply Voltage: 6 to 16 Vdc (typically powered by datalogger’s 12 V supply)
Current Drain (typical): 120 μA (quiescent); 1.7 mA (measurement; takes 0.7 seconds)
EMC Compliance: Tested and conforms to IEC61326:2002

Relative Humidity

Measurement Range: 0 to 100% RH (-20° to +60°C)
Output Resolution: 0.03% RH
Accuracy (at 25°C): ±2% (10% to 90% range), ±4% (0% to 100% range)
Short Term Hysteresis: <1% RH
Temperature Dependence: better than ±2% over -20° to 60°C)
Stability (Typical): ±1.0% per year
Response Time w/Filter: <10 seconds (63% response time in air moving at 1 m s-1)
Calibration Traceability: NIST and NPL standards

Temperature

Measurement Range: -40° to +70°C
Output Resolution: 0.01°C
Accuracy: ±0.3°C at 25°C; ±0.4°C (+5° to +40°C); ±0.9°C (-40°C to +70°C)
Response Time w/Filter: <120 seconds (63% response time in air moving at 1 m s-1)

41303-5A Radiation Shield

The 41303-5A is a naturally aspirated 6-plate radiation shield. Its louvered construction allows air to pass freely through the shield thereby serving to keep the probe at or near ambient temperature. The shield's white color reflects solar radiation.

Features

Provides a naturally aspirated radiation shield
Used with HMP50, CS215, CS500, 107, or 108 probes
Mounts directly to our tripods and towers
Replaces our 41303 6-Plate Gill Radiation Shield
Manufactured by RM Young
Specifications
The 41303-5A attaches to a crossarm, mast, or user-supplied pipe with a 1.0" to 2.1" OD.

Producing Area:USA