The FW3 Fine Wire Thermocouple is typically used to measure atmospheric temperature gradients or fluctuations. The small mass of the thermocouple is less susceptible to solar loading; therefore, a radiation shield is not...

The FW1 Fine Wire Thermocouple is typically used to measure atmospheric temperature gradients or fluctuations. The small mass of the thermocouple is less susceptible to solar loading; therefore, a radiation shield is not...

The FW05 Fine Wire Thermocouple is typically used to measure atmospheric temperature gradients or fluctuations. The small mass of the thermocouples is less susceptible to solar loading; therefore, a radiation shield is n...

The ASPTC is a type E thermocouple housed in a white, elongated radiation shield. The radiation shield reduces solar loading on the thermocouple by drawing air across the measurement junction with a fan. The radiation sh...

The 43347 probe is typically used in air quality applications to obtain the delta temperature. Air temperature is measured at 2- and 10-meter measurement heights to determine atmospheric stability as required by the EPA ...

The 109-L Temperature Probe is a thermistor used with our CR200-series dataloggers. The CR200-series dataloggers have a special instruction for measuring the 109 probe. The 109 is designed to measure the temperature of a...

The 108 is a general purpose temperature sensor that can be used to accurately measure the temperature of a variety of media, most commonly air, water, and soil. The 108 consists of a thermistor encapsulated in a cylindr...

The 107 is a general purpose sensor that can be used to accurately measure the temperature of a variety of media, most commonly air, water, and soil. The 107 temperature sensor consists of a thermistor encapsulated in a ...

The CE8 is an 8-channel current excitation module designed to provide a 50 mA constant current to the heating element of a 229-L Heat Dissipation Water Matric Potential sensor. Features Sources current for up to eight 22...

The CE4 is a 4-channel current excitation module designed to provide a constant current to the heating element of a 229-L Heat Dissipation Water Matric Potential sensor. Features Sources current for up to four 229 probes...