The FW3 Fine Wire Thermocouple is typically used to measure atmospheric temperature gradients or fluctuations. The small mass of the thermocouple is less susceptible to solar loading; therefore, a radiation shield is not required. One differential analog input per sensor is required.

Features

FW3 has a 0.003 inch diameter
Extremely small diameters virtually eliminate solar loading
Type E thermocouples—typical output is 60 µV/°C
Typically used to measure atmospheric temperature flux with research-grade accuracy
Shipping/transport requires TCBR/ENC (capacity=4)

Specifications

Type: Chromel-Constantan
Typical Output: 60 μV/°C

Producing Area:USA