17212 Magnetic Mount

The 17212 magnetic mount allows the GPS16X-HVS to be attached to a magnetically susceptible metallic surface—typically the CM235. Three screws are included for attaching the GPS16X-HVS to the 17212 mount.

CM235 Magnetic Mounting Stand

The CM235 consists of rectangular plate, mounting bracket, u-bolts, lock washers, and nuts. It allows one peripheral with a magnetic base (typically antennas) to be mounted to a crossarm or mast (1.0" to 2.1" OD). Compatible peripherals include certain GPS or short-range omnidirectional antennas fitted with magnetic bases.

SC110 RS-232-to-Datalogger Control Port Cables

The SC110 consists of two cables—each 2-ft (0.6-m) long. One end of each cable provides stripped, tinned leads for attachment to the control ports on a CR800, CR850, CR1000, or CR3000 datalogger. On the other end, one of the cables is fitted with a 9-pin male connector, and the other cable is fitted with a 9-pin female connector.

Features

By having two cables, connection to either an RS-232 DCE or DTE device is supported—depending on the cable used.

Producing Area:USA