The wind monitors are lightweight instruments that measure wind speed and wind direction. Manufactured by R. M. Young, the wind monitors are cabled for use with our dataloggers.
The wind monitors' design emphasizes simplicity and lightweight construction. They are made out of rigid UV-stabilized thermoplastic with stainless steel and anodized aluminum fittings. The thermoplastic material resists corrosion from sea-air environments and atmospheric pollutants. The wind monitors use stainless-steel, precision-grade ball bearings for the propeller shaft and vertical shaft bearings.

Features

Propeller-type anemometer with fuselage and tail wind vane
Rugged design for use in a variety of climates worldwide
Manufactured by R. M. Young

Specifications

Wind Speed
Range: 0 to 100 m/s (0 to 224 mph)
Accuracy: ±0.3 m/s (0.6 mph) or 1% of reading
Starting Threshold: 1.0 m/s (2.2 mph)
Distance Constant (63% recovery): 8.9 ft (2.7 m)
Output: ac voltage (3 pulses per revolution); 90 hz (1800 rpm)=8.8 m/s (19.7 mph)

Wind Direction
Range: 0 to 360° mechanical, 355° electrical (5° open)
Accuracy: ±3°
Starting Threshold at 10° Displacement: 1.1 m/s (2.4 mph)
Damping Ratio: 0.3
Damped Natural Wavelength: 24.3 ft (7.4 m)
Undamped Natural Wavelength: 23.6 ft (7.2 m)
Output: analog dc voltage from potentiometer—resistance 10 kohms; linearity 0.25%; life expectancy 50 million revolutions
Power switched excitation voltage supplied by datalogger

Producing Area:USA