The CR7 723 Card provides 14 differential or 28 single-ended inputs for analog voltage measurements in the range of ±5 V. Each CR7 723 is placed in an open slot on the CR7 720 or CR7 720XL I/O module (the CR7 720 can acc...

Either the CR720 or CR720XL I/O Module is required in each CR7 System. The CR720XL provides regulated power for analog and digital functions, 16-bit A/D-D/A conversion (analog interface card), and a precision voltage ref...

Either the CR720 or CR720XL is required in each CR7 System. The CR720 provides regulated power for analog and digital functions, 16-bit A/D-D/A conversion (analog interface card), and a precision voltage reference. The m...

The CR7 is a precision instrument that is primarily used in multi-parameter research and industrial applications. Each CR7 system is individually configured to meet the specific measurement needs of the customer. A contr...

The CR5000 is a rugged, high performance, integrated datalogger/data acquisition system with a built-in keyboard, graphics display, and PCMCIA card slot. It combines 16-bit resolution with a maximum throughput of 5000 me...

The CR3000 Micrologger® is a self-contained, rugged datalogger that can measure most sensor types directly, communicate via modems, control external devices, and store both data and programs in either non-volatile Flash ...

The SC110 consists of two cables—each 2-ft (0.6-m) long. One end of each cable provides stripped, tinned leads for attachment to the control ports on a CR800, CR850, CR1000, or CR3000 datalogger. On the other end, one of...

The SC-USB allows Campbell Scientific dataloggers to communicate directly with computers that have a USB interface. The SC-USB is optically isolated, which helps eliminate noise pickup associated with PC power supplies a...

The SC32B Optically Isolated Interface is used to connect a datalogger’s CS I/O port with a PC’s RS-232 port. This interface converts the computer’s RS-232 voltage levels to the CMOS levels of the datalogger. It also iso...

The CR1000KD is used to check datalogger status, display or plot sensor readings and stored values, and to enter numeric data or change port/flag state. One CR1000KD may be carried from station to station in a datalogger...