Manufactured by Jerome Industries, the 9591 wall charger is used with the PS100, CH100, and other power supplies. This transformer accepts 110 Vac and outputs 18 Vac @ 1.2 A. It's 6-ft cord terminates in pigtails for...

The SP70 typically recharges the user-supplied 12-V flooded battery used in systems with large power requirements such as the CO2 Bowen ratio and CO2 eddy covariance systems. The SP70 provides 70 W typical peak power, 4....

The SP20R is a 20 watt solar panel with a regulator that connects directly to a user-supplied external battery. The SP20R is used for system configurations that have higher than average power requirements. It is recommen...

The SP20 is a 20 watt unregulated solar panel. It is often used for system configurations that have higher than average power requirements, or in higher elevation and latitude locations. If you are unsure about what type...

The SP10R is one of our most popular solar panels. It is typically a sufficient charging source for most of our system configurations at most tropical to temperate latitudes. The SP10R is very similar to the SP10 except ...

The SP10 is one of our most popular solar panels. It is typically a sufficient charging source for most of our system configurations at most tropical to temperate latitudes. Features Replaces our MSX10 Solar Panel Connec...

The SP5-L is typically used with our CR200-series dataloggers but may be suitable for use with other dataloggers provided that the application's power requirements are low enough to permit recharge from an intermitte...

The CH100 is a charging regulator for 12 V rechargeable batteries. It is commonly used when a rechargeable battery is required for the application and the PS100 or PS12LA power supply (7 Ahr) does not contain enough rese...

The DCDC18R Boost converter is intended to accept an 11 to 16 Vdc input and boost it to 18 Vdc. Its main use is to boost automobile supply voltages to the 17 Vdc minimum required to charge the batteries in the CR23X (ret...

The 18529 is the Morning Star SunSaver-10 Regulator. This regulator is used with our SP70 solar panel. It outputs up to 10 A at a nominal 12 Vdc. A 15 ft (4.6 m) cable is included for connecting the regulator to the rech...