CM6 6-foot Galvanized-Steel Instrument Tripod

The CM6 provides measurement heights up to 6 feet (2 meters) and support for attached sensors and mounts, solar panels, and environmental enclosures. The tripod legs are individually adjustable allowing adjustment of our wind set's measurement height, and tripod installation over uneven terrain.

Features

Six-foot measurement height
Support for meteorological sensors, hydrological sensors, sensor mounts, solar panels, environmental enclosures
Portable instrument mount
Individually adjustable legs
Lightning and grounding rods, grounding cables, grounding cable clamps, ground stakes, and UV-resistant cable ties included
Optional guy kit available for wind loading

Specifications

Measurement Height: up to 6 ft (2 m)
Vertical Load Limit: 100 lbs (45 kg)
Mast: 1.25 IPS (1.66 outer diameter)
Leveling Adjustment: Slide collars on each leg adjust individually
Leg Base: 2 in x 4 in with 0.5-in hole for ground stake
Portability: Collapsible to 4-ft length by 9-in diameter
Wind Load Recommendations
Sustained Wind Tolerance: 100 mph (unguyed)
Gust Tolerance: 130 mph (unguyed)

CM10 10-foot Galvanized-Steel Instrument Tripod

The CM10 provides measurement heights up to 10 feet (3 meters) and support for attached sensors and mounts, solar panels, and environmental enclosures. The tripod legs are individually adjustable allowing adjustment of our wind set's measurement height, and tripod installation over uneven terrain.

Features

Ten-foot measurement height
Support for meteorological sensors, hydrological sensors, sensor mounts, solar panels, environmental enclosures
Portable instrument mount
Individually adjustable legs
Lightning and grounding rods, grounding cables, grounding cable clamps, ground stakes, and UV-resistant cable ties included
Optional guy kit available for wind loading

Specifications

Vertical Load Limit: 100 lbs (45 kg)
Mast: 1.25 IPS (1.66 outer diameter)
Leveling Adjustment: Slide collars on each leg adjust individuallyThe CM6 includes lightning and grounding rods, grounding cables, grounding cable clamps, ground stakes, and UV-resistant cable ties.
Leg Base: 2 in x 5 in with 0.5-in hole for ground stake
Portability: Collapsible to 6-ft length by 9-in diameter
Wind Load Recommendations
70 mph (unguyed); 120 mph (guyed CM10);
Gust Tolerance: 100 mph (unguyed); 150 mph (guyed)

CM10K CM6/CM10 Tripod Kit

The CM10K Tripod Kit contains the hardware necessary to construct a CM6 Instrument Tripod or CM10 Instrument Tripod. The customer must obtain threaded and unthreaded lengths of 0.75" and 1.25" galvanized pipe and copper ground rod from a local supply house. The CM10K is primarily intended for overseas shipments.

Features

Contains unique hardware used in CM6 Tripod or CM10 Tripod
Some hardware and galvanized pipe must be purchased from a local source
For a complete list of included parts, see Table 1.1 of manual
Intended for international shipments or where reduced size and weight is desired

Producing Area:USA