19335 Bulkhead Antenna Cable, Type N-to-RPSMA

The 19335 is a common accessory for our general use enclosures. It is intended for enclosures that will house a RF400-series spread spectrum radio or CR200-series datalogger. When ordered, Campbell Scientific will punch a special bulkhead hole in the enclosure and install a 17" (43.2 cm) cable.

Specifications

Cable Type: LMR 195 coaxial
Antenna Connector: Type N female
Transceiver Connector: Reverse Polarity SMA (RPSMA) Female

19333 Bulkhead Antenna Cable, Type N-to-TNC

The 19333 is a common accessory for our general use enclosures. It is intended for customers who will use a Raven100-series or Redwing100-series digital cellular modem with a 14454, 20679, or 18285 antenna (not used with the 14453 antenna). When the 19333 is ordered, Campbell Scientific will punch a special bulkhead hole in an enclosure and install a 17" (43.2 cm) cable.

Specifications

Cable Type: LMR195 coaxial
Antenna Connector: Type N female
Transceiver Connector: TNC male

19334 Bulkhead Antenna Cable, Type N-to-NSMA

The 19334 is a common accessory for our general use enclosures. It is intended for enclosures that will house our RF450 radio, a RavenXT-series cellular modem, or a user-supplied Freewave radio. When ordered, Campbell Scientific will punch a special bulkhead hole in the enclosure and install a 17" (43.2 cm) cable.

Specifications

Cable Type: LMR195 coaxial
Antenna Connector: Type N female
Transceiver Connector: SMA

19336 Bulkhead Antenna Cable, SMA-to-SMA

The 19336 is a common accessory for our general use enclosures. It is intended for enclosures that will house the GPS device used with our satellite transmitter. When ordered, Campbell Scientific will punch a special bulkhead hole in the enclosure and install a 17" (43.2 cm) cable.

Specifications

Type: LMR195 coaxial
Antenna Connector: SMA male
Transceiver Connector: SMA female

Producing Area:USA