Motors & Steering

Cable Buddy steering cable lubrication system virtually eliminate wear in the inner cable, where most problems occur.
Doel-Fin hydrofoil stabilizer fins improve performance on boats with outboard motors or outdrive units.
Handi-Mate® Outboard Extension Handle fits virtually all twist-grip outboard motors! Handi-Mate® extends handle from 30 to 47" (.76 to 1.19 meters).
Happy Troller® For the Fisherman who thinks he has everything! Slows even big motors down to that “ever-so-slow” fish tantalizing speed.
Lube II steering rod sealer and lubricator system allows sticky, hard-to-move steering rods to be properly and easily lubricated.
Max-Lube extreme service lubricant provides superior protection for steering cables, sporting equipment, gears, and more.
Motor Caddy outboard hoisting harness makes lifting and moving cumbersome motors safer and simpler.
No-Spill fuel recovery system fits over the fuel tank vent to capture the fuel often spilled when the tank reaches full.
Prop Sox protect propellers from road kickback while towing, while their bright red color adds visibility and safety.
Rudder Position Indicator shows you the angle of the rudder, helping you avoid veering and collisions in close situations.
Tiller-Tamer tiller stabilizer and lock maintains cruising course with no hands, in any weather or wind condition.
Whale Tail XL® extends out behind the prop to utilize prop wash energy which is normally lost. Whale Tail transforms this energy into lift for immediate response when the throttle is applied.

Cable Buddy
Cable Buddy™ is a complete steering cable lubricant system.Seals moisture out, puts lubricant in. Prevents corrosion and freezing to – 40°F (– 40°C). Cable Buddy lubricates and virtually eliminates all wear in the inner cable, where most problems occur. Works on inboard, outboards, and inboard/outboard steering cables. Fits all major US and foreign motors (7/8" x 14 pitch threads). Easy to install.
Includes the patented stainless steel Cable Buddy Nut with plug and sealing washer, oiling tube assembly, and Max-Lube, the ideal lubricant for steering cables. Cable Buddy comes with 1 lube nut and Max-Lube. Cable Buddy II comes with 2 lube nuts and Max-Lube.

Motors & Steering
Doel-Fin
Doel-Fin is the original hydrofoil developed by an aeronautical engineer to improve overall performance on all boats with outboard motors or outdrive units. Molded in two pieces of guaranteed unbreakable, high-strength plastic, each foil is designed to flex independently to absorb shock. The positive effects include greater stability, consistent planing at lower RPM, faster out-of-the hole performance, better gas mileage, steadier turns, higher top-end speeds and lower bow rise at all speeds. Doel-Fin is designed for use with small motors, big motors and inflatable dingies.
Outboard Extension Handle fits virtually all twist-grip outboard motors!

Motors & Steering
Handi-Mate extends handle from 30 to 47" (.76 to 1.19 meters). Easy to install—tough polycarbonate head simply clamps over existing handle grip. Does not affect throttle tension adjustment. Depress button & align proper hole for desired length.
Lightweight—only 16 oz. (454 grams)
Non-slip comfort grip
Access hole for kill button
Turn-locking knob makes securing and removing easy
Anodized aluminum—no parts to rust or corrode
Stainless steel hardware

Motors & Steering
Happy Troller® for your outboard engine
For the Fisherman who thinks he has everything!
Slows even big motors down to that “ever-so-slow” fish tantalizing speed.
A significant invention in the sport of troll fishing, Happy Troller® mounts on the anti-cavitation plate to allow fine control of trolling speed. At cruising speed, your boat’s stability is enhanced.
Locks in “down” position for trolling.
Locks in “up” position for cruising.
Happy Troller® is the answer to correct trolling speed. Use it year-round in all boating activities; salt and fresh water.
Key Features:
Reduces troll speed in “down” position
Acts as a stabilizer in “up” position
Maintains stability in bow-light boats
Smooths out ride in rough water
Reduces porpoising and cavitation
Made of only highest quality stainless steel and marine aluminum; clear anodized aluminum finish
Installs in 15 minutes
Stainless steel mounting hardware and installation & operating instructions provided with each unit
Two Models:
460 Large Troller.
Fits inboard/outboards plus all outboard motors 50 hp and larger.
461 Small Troller.
Fits outboard motors from 20 to 50 hp.

Motors & Steering
Lube II™
Lube II allows sticky, hard to move steering rods to be properly and easily lubricated for smooth, easy steering action.The system includes a stainless steel lubricating nut with an oil seal and a grease (zerk) fitting. This lubricator's unique design keeps moisture and contaminants out while enabling you to pour or pump several types of lubricant in. Works for both mechanical and hydraulic systems. Fits all major US and foreign motors (7/8" x 14 pitch threads). Easy installation. Marine grade stainless steel nut for salt and fresh water use.

Motors & Steering
Max-Lube™
Max-Lube™ excels in performance under pressure — anywhere oil is required. This proprietary synthetic film has many advantages over other synthetic and premium oils: superior rust and corrosion protection, rapid separation from water, greater stability at temperature extremes, 10 - 20% reduction in operating temperature, and 5 times greater load carrying. The net result is smoother, quieter, cooler, and longer operation. Recommended for steering cables (all boat motors, fresh or salt water), sporting equipment, all gears regardless of type or size, and all metals.
Comes in a 3 fl.oz (90 ml) container.

Motors & Steering
Motor Caddy™
Motor Caddy is sized to be quickly attached to most outboards from 2-15 horsepower. This improved design features a longer strap to fit 4-stroke motors and an added security strap for today's streamlined engine cases. Made of UV resistant materials that will endure the marine environment for those who prefer a semi-permanent installation. Glass filled nylon buckles insure that Motor Caddy is easy to install and remove. Makes lifting and moving cumbersome motors safer and simpler. PATENTED

Motors & Steering
No-Spill™
No-Spill is a fuel resistant bottle designed for temporary attachment to the hull, over the fuel tank vent, while fueling. It captures fuel spilled from the vent when the tank reaches a full level, fuel that would otherwise stain the hull and run into the water. Spilling fuel into U.S. waters is illegal and bad for the environment. No-Spill attaches to the hull using two super strong suction cups. Designed for use with gasoline or diesel fuel. Fits all boats with fuel tank vents up to 1.5" (3.8 cm) in diameter. Patented.

Motors & Steering
Prop Sox®
Prop Sox protect your expensive propellers from road kickback when towing and promote safety by increasing your propellers' visibility.
Prop Sox are made of bright plastic and simply slip over each propeller blade. The sox are held in place with a rubber cinch strap. Set of three socks, cinch straps and 3 reflector hot-dots included. For use when your boat is out of the water only. PATENTED.

Motors & Steering
Rudder Position Indicator
Awareness of the rudder angle is an important safety factor. This is especially true while moving in and out of your berth, drawing alongside another boat, picking up a skier, mooring, or any other "close call" situation. Davis' Rudder Position Indicator gives instant visual reference of rudder angle.
The pointer swings a full thirty degrees with each revolution of the wheel. Mounts directly to your hub (approximately 2" (5 cm) in diameter) with a self-adhesive pad . Rugged, hermetically sealed, weatherproof, and sunproof housing ensures long life. No cables, adjustments, or electricity required; gravity power makes it simple and service-free. Suitable for boats with mechanical and single station hydraulic steering systems.

Motors & Steering
Tiller-Tamer™
Maintains cruising course with no hands, in any weather or wind condition. The tension is smoothly adjustable from fully locked to fully free. Tiller-Tamer gives improved control and feel to the tiller handle. Does not interfere with automatic steering systems. No loss of cockpit space. No need to lash the tiller when boat is moored or trailered.

Motors & Steering
Whale Tail XL®
Aluminum Stabilizer and Ski Boat Fin
Improves performance in any I/O or outboard motor!
The Whale Tail XL extends out behind the prop to utilize prop wash energy which is normally lost. Whale Tail transforms this energy into lift for immediate response when the throttle is applied.
Unique hydrodynamic design
Stabilizes bow-light boats
Pops skiers up in less time
Flattens wake for water skiing; creates positive, skid-free turns • With bow lowered, visibility is improved—and safety • Smooths out ride in rough water • Reduces porpoising & cavitating • Increases top speed and fuel savings in most applications • Mounts on the anti-cavitation plate of all inboard/outboards and outboards • Installs in 15 minutes with stainless steel hardware included • Marine grade aluminum with durable anodized finish
Use the Whale Tail XL year-round in freshwater or saltwater to improve performance of any boat!

Motors & Steering

Producing Area:USA