The algal chambers are designed for measuring CO2 exchange of algal samples in an open flow gas exchange system. Each chamber has a Luer port for inlet gas at its base and a Luer port for outlet gas at the top. Each port is coupled to a length of Excelon tubing by a Luer connector. The tubing attached to the inlet port is supported by a clamp at the top of the chamber to keep it in a vertical orientation. This, and the very small holes in the bubbling tube, ensure that the sample does not leak from the chamber if gas flow is interrupted. A fill port is located at the base of the chamber slightly offset from the gas inlet port. This is plugged during use and is used only when filling, draining and cleaning the chamber.

    ALGAL CUVETTE (10 mL)

    ALGAL CUVETTE (30 mL)

Producing Area:Canada