Post Image

S-UCD-M001

The Contact Closure Pulse Input Adapter connects sensors with pulse outputs to loggers with smart-sensor inputs. This smart sensor is compatible with contact closures, such as tipping-bucket rain gauges or reed switches ...

Show More
Post Image

T-ASH-G2-200

The 200-psig Ashcroft Gauge Pressure Sensor provides precision pressure measurements in compressed air systems, water, or other compatible gases and fluids with an accuracy of ±1% FS from -20° to 85°C (-4° to 185°F) and ...

Show More
Post Image

T-ASH-G2-100

The 100-psig Ashcroft Gauge Pressure Sensor provides precision pressure measurements in compressed air systems, water, or other compatible gases and fluids with an accuracy of ±1% FS from -20° to 85°C (-4° to 185°F) and ...

Show More
Post Image

T-VER-PXU-L

The T-VER-PXU-L is a differential air pressure transducer that utilizes a highly accurate and stable sensor, which is microprocessor profiled for improved accuracy and reliability. The stability, accuracy and ease of use...

Show More
Post Image

CSV-A8

The CSV-A8 is a split-core AC Current Sensor with adjustable threshold switch output to monitor when equipment turns on and off. Just install the CSV-A8 around a current-carrying wire to the equipment you need to monitor...

Show More
Post Image

CABLE-2.5-STEREO

An external input cable with 13mm (0.5") tinned braided wire leads. Voltage input specifications vary with attached logger. Note that only passive sensors should be attached when this cable is used with Intrinsicall...

Show More
Post Image

T-VER-H970-200

Split-Core 200A DC Transducer sensor that measures up to 200 Amps of DC current. Requires analog port selection during U30 system configuration and use of a S-FS-CVIA when using the H22-001 logger. Features: High amperag...

Show More
Post Image

T-VER-971BP-200

Split-Core Bi-Polar DC Transducer sensor that measures up to 200 Amps of DC current in both flow directions. Requires analog port selection during U30 system configuration and use of a S-FS-CVIA when using the H22-001 lo...

Show More
Post Image

T-MAG-SPT-600

The Magnelab 600-Volt AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage. One or two PTs can be used with each FlexSmart TRMS module. This sensor offers an accur...

Show More
Post Image

T-MAG-SPT-300

The Magnelab 300-Volt AC Potential Transformer is used with the FlexSmart TRMS Module to provide accurate measurement of AC voltage. One or two PTs can be used with each FlexSmart TRMS module. This sensor offers an accur...

Show More