The SP10 is one of our most popular solar panels. It is typically a sufficient charging source for most of our system configurations at most tropical to temperate latitudes. Features Replaces our MSX10 Solar Panel Connec...

The SP5-L is typically used with our CR200-series dataloggers but may be suitable for use with other dataloggers provided that the application's power requirements are low enough to permit recharge from an intermitte...

The CH100 is a charging regulator for 12 V rechargeable batteries. It is commonly used when a rechargeable battery is required for the application and the PS100 or PS12LA power supply (7 Ahr) does not contain enough rese...

The DCDC18R Boost converter is intended to accept an 11 to 16 Vdc input and boost it to 18 Vdc. Its main use is to boost automobile supply voltages to the 17 Vdc minimum required to charge the batteries in the CR23X (ret...

The 18529 is the Morning Star SunSaver-10 Regulator. This regulator is used with our SP70 solar panel. It outputs up to 10 A at a nominal 12 Vdc. A 15 ft (4.6 m) cable is included for connecting the regulator to the rech...

The 17365 is a 12 V, 7 Ahr battery used with our CR200-series dataloggers. It is typically recharged with the SP5-L 5-Watt Solar Panel or #15988 Wall Charger. It does not fit in the ENC200 enclosure. However an ENC10/12 ...

BP12 12-Ahr Battery Pack The BP12 is a rechargeable 12 Volt, 12 Ahr battery pack that can power a Campbell Scientific system that has above average power requirements. The BP12 requires a regulated charging source, provi...

The PS24 consists of a 24-Ahr battery, CH100 regulator, and a 10" x 12" environmental enclosure. This power supply is intended for systems such as the ET107 where the weather station's enclosure is not larg...

The PS100 provides a 12 Vdc, 7.0 Ahr rechargeable power supply for the CR500, CR510, CR800, CR850, CR10, CR10X, or CR1000 dataloggers and peripherals. The rechargeable battery can be trickle-charged from ac power (requir...

The BPALK is a battery pack for powering the CR500, CR510, CR10, CR10X, CR800, CR850, and CR1000 Dataloggers. The BPALK includes eight replaceable "D"-cell alkaline batteries. To ensure power is not lost while ...