The CR9000X is a modular, multiprocessor system that provides precision measurement capabilities in a rugged battery-operated package.

The CR9000X consists of a base system and a chassis with I/O module slots that accepts up to nine user-selected modules. A compact version of the CR9000X is available as the CR9000XC, which accepts up to five user-selected modules. The CR9000X has a powerful instruction set that supports measurement of most sensor types, on-board processing, data reduction, and intelligent control.

Features

Intended for applications requiring rapid scan rates and/or a large number of channels
Modular, multi-processor base system includes CR9032 CPU, power supply and A/D modules
System throughput is 100,000 samples/second
Up to nine I/O Modules can be used to configure a system for specific applications. Modules include:
CR9050 5 Volt Analog Input Module with RTD
CR9051E Fault-protected 5 Volt Analog Input Module
CR9052DC Anti-alias Filter Module with DC Excitation
CR9052IEPE Anti-alias Filter Module for IEPE Sensors
CR9055 50 Volt Analog Input Module
CR9055E 50 Volt Analog Input Module with Easy Connector Module
CR9058E 60 Volt Isolated Analog Input Module with RTD, includes one CR9058E Easy Connector Module
CR9060 Excitation Module
CR9071E Pulse Module with Easy Connector Module
16-bit resolution
On-board, BASIC-like programming language
PC9000 Support Software version 5.0 (included) provides program generation, data graphics, and analysis
128 MBytes internal SDRAM for program and data storage

Specifications

For the CR9000X, the current drain, weights, and specific number of input/output channels depend on the I/O modules chosen.

Current Drain: 750 to 1000 mA (processing), 750 to 4000 mA (analog measurement)
A/D Bits: 16
Scan Rate: 100,000 Hz
Analog Channels: 28 single-ended (14 differential) per CR9050, CR9051E, or CR9055(E) 
Analog Voltage Range: ±5000 mV w/CR9050 or CR9051E, ±50000 mV w/CR9055(E), ±60000 mV w/CR9058E
Analog Voltage Accuracy: ±(0.07% of reading + 4 A/D counts), -25° to +50°C
Measurement Resolution: to 1.6 μV
Switched Excitation Channels: 10 voltage per CR9060
Pulse Counters: 12 per CR9071
Control Ports: 1 SDM; 8 outputs per CR9060 or 16 I/Os per CR9071
Memory: 128 kB (program), 128 MB (data storage)
Communication Ports: 1 CS I/O, 1 RS-232,
1 10baseT/100baseT
Protocols Supported: SDM
Warranty: 3 years

Producing Area:USA